Method 5: Call a ProfessionalĪ skilled appliance repair professional will be able to replace your microwave’s control panel with ease. Please keep in mind that you should unplug your microwave before fixing it. You’ll obviously need to purchase a matching replacement for your microwave model. This will influence where your mounting screws and clips are placed, as well as how to replace one control panel for a new one. If you’re changing a microwave with an integrated oven, be sure it’s above the range. If you decide to replace the panel, be sure you find out specific information on this repair based on the brand and model of your microwave. In most cases, attempting to replace the entire panel assembly is preferable to try to figure out which little electric component went wrong and how to repair it. If all else fails, consider replacing the control panel. Fuses are placed in various areas of each microwave type and manufacturer. The temperature and the monitor fuse should be investigated if the microwave display is not functioning. Method 3: Check the Temperature and Monitor Fuse There’s a chance you just resolved whatever was wrong. After that, reconnect your microwave and give it a go. Then replace the mounting screws, vent cover, and mounting screws for the vent cover. When all of the connections are secure, replace the panel and press it until the clips click. If there’s a loose wire, fix it by following these steps. Secure these wires firmly and/or disconnect and reconnect each wire harness. There will be wires connecting it to the microwave. Take out the screws and pry open the panel. Additional mounting screws secure the panel to the microwave cabinet after you’ve opened the door. Remove the screws and remove the vent from the door. It may be necessary to perform a manual discharge, which should not be attempted without training and previous experience.įind mounting screws on the top front of your microwave, which covers the front vent. Even after unplugging the device, the capacitor within will retain electricity for a long time. Unplug the microwave from the wall to prevent receiving a shock when you access the wires behind the panel. To check this, take off the control panel and look “under the hood” to see if you can spot any issues that might be easily resolved. If the problem isn’t a power issue, then it’s likely that it’s inside your microwave display and control panel. Related: How to Fix Whirlpool Microwave Door Error Method 2: Secure the Loose Wires In case everything else fails, try plugging your microwave into another outlet. If one break is in the middle of facing in the incorrect direction, turn it “off” then back on to reset it. There’s a chance that the electricity was shut off to your outlet, not the plug. Is the plug firmly inserted into the wall? Does the end of the cable seem to be in good condition? Is the cable properly secured, not loose or exposed at the base connection? Examine your wall socket. If the screen has vanished completely and the buttons aren’t beeping anymore, it’s possible that your microwave was just unplugged or that a tripped circuit breaker is responsible.īegin at the rear of the appliance. The power cable and power supply are the first things to check if something is wrong with an appliance.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |